China INOVATO HF02-04 Gear Drive Sprinkler - 4 Adjustable Nozzle, Suppliers & Factory Direct Pricing
Dimensions
Features
-
Models: 10cm
-
Arc setting: 60°~360°
-
Factory-installed rubber cover
-
Through-the-top arc adjustment
-
Quick check arc mechanism
-
Water lubricated gear-drive
-
Nozzle choice: 12
-
Nozzle range: 1.5~8.0 blue, 2.0~4.5 low angle blue
-
Warranty: 2 years
Operating Specifications
-
Radius: 4.9~14.0m
-
Flow: 0.07~3.23m3/hr; 1.2~53.8l/min
-
Precipitation rate: 10mm/hr approx
-
Trajectory: Standard = 25° Low angle = 13°
-
Recommended working pressure: 1.7~4.5bar; 170~450kPa
-
Operating working pressure: 1.4~7bar; 140~700kPa
Introduction To End Cap Hole Position
Use the plastic head to the side lift hole, turn around and lift the pop-up head. Please lift and release slowly. Caution not to hurt yourself.
Use the steel head to the nozzle-remove hole, anti-clockwise to loose the screw and remove the nozzle. Pick a replacement nozzle and clockwise the screw. Please don't over-rotate it. Caution not to scratch the nozzle.
Use the plastic head to the angle-adjust hole, clockwise to magnified the angle, anticlockwise to reduce the angle. Please rotate slowly, check the angle each half circle. Caution not to over-rotate it.
Detail Display
Frequently Asked Questions
The recommended working pressure is between 1.7 and 4.5 bar (170~450 kPa). The broader operating working pressure capability ranges from 1.4 to 7 bar (140~700 kPa).
Insert the plastic tool head into the angle-adjustment hole on the top cover. Rotate clockwise to increase the angle or anti-clockwise to reduce it (adjustable from 60° to 360°). Rotate slowly and check the angle every half turn.
Insert the steel tool head into the nozzle-remove hole and turn anti-clockwise to loosen the screw. Remove the nozzle, insert the replacement nozzle, and turn clockwise to tighten without over-rotating or scratching the nozzle.
This sprinkler covers a radius of 4.9m to 14.0m with a water flow rate of 0.07~3.23 m³/hr (1.2~53.8 l/min) and an approximate precipitation rate of 10mm/hr.
The unit features an overall height of 21cm, an exposed diameter of 4.5cm, a pop-up model height of 10cm, and a standard 3/4" female inlet connection.
This product comes with a 2-year manufacturer warranty for guaranteed performance and reliability.
Inquiry Now
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.