Hot Products
China INOVATO HF02-06 Gear Drive Sprinkler - 6 Adjustable Nozzles, Turfgrass & Garden Supplier, Factory Direct
Dimensions
📐
Overall height: 25cm
📐
Exposed diameter: 4.5cm
📐
Inlet size: 3/4" female
Features
- Models: 15cm
- Arc setting: 50°~360°
- Factoryinstalled rubber cover
- Through-the-top arc adjustment
- Quick check arc mechanism
- Water lubricated gear-drive
- Nozzle choice: 12
- Nozzle range: 1.5~8.0 blue, 2.0~4.5 low angle blue
- Warranty: 2 years
■ standard/low-angle
Introduction To End Cap Hole Position
Lift
Use the plastic head to the side lift hole, turn around and lift the pop-up head. Please lift and release slowly. Caution not to hurt yourself.
Nozzle Remove
Use the steel head to the nozzle-remove hole, anti-clockwise to loose the screw and remove the nozzle. Pick a replacement nozzle and clockwise the screw. Please don't over-rotate it. Caution not to scratch the nozzle.
Angle Adjustment
Use the plastic head to the angle-adjust hole, clockwise to magnified the angle, anticlockwise to reduce the angle. Please rotate slowly, check the angle each half circle. Caution not to over-rotate it.
Detail Display
Frequently Asked Questions
What are the physical dimensions of this model?
This model has an overall height of 25cm, an exposed diameter of 4.5cm, and features a 3/4" female inlet size.
How do I adjust the spray angle of the sprinkler?
Insert the plastic head tool into the angle-adjust hole. Turn clockwise to increase the angle or counter-clockwise to decrease it. Rotate slowly and check the adjustment every half circle without over-rotating.
What is the procedure for replacing the nozzle?
Insert the steel head tool into the nozzle-remove hole, turn anti-clockwise to loosen the screw, and remove the nozzle. Place the new nozzle in and tighten the screw clockwise, taking care not to scratch the nozzle or over-rotate.
What is the range of the arc settings?
The arc setting is fully adjustable from 50° to 360° through-the-top arc adjustment mechanism.
Does the sprinkler head come with a warranty?
Yes, this product comes with a factory-backed 2-year warranty.
How should I safely lift the pop-up head?
Place the plastic head tool into the side lift hole, turn it, and lift the pop-up head slowly. Ensure you release it slowly to avoid hurting yourself.
Inquiry Now
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.