China HF02-12 Gear Drive Sprinkler Supplier - 12 Adjustable Nozzle Watering Solution from Factory
Dimensions
Features
- Models: 30cm
- Arc setting: 50°~360°
- Factoryinstalled rubber cover
- Through-the-top arc adjustment
- Quick check arc mechanism
- Water lubricated gear-drive
- Nozzle choice: 12
- Nozzle range: 1.5~8.0 blue, 2.0~4.5 low angle blue
- Warranty: 2 years
■ standard/low-angle
Introduction To End Cap Hole Position
Use the plastic head to the side lift hole, turn around and lift the pop-up head. Please lift and release slowly. Caution not to hurt yourself.
Use the steel head to the nozzle-remove hole, anti-clockwise to loose the screw and remove the nozzle. Pick a replacement nozzle and clockwise the screw. Please don't over-rotate it. Caution not to scratch the nozzle.
Use the plastic head to the angle-adjust hole, clockwise to magnified the angle, anticlockwise to reduce the angle. Please rotate slowly, check the angle each half circle. Caution not to over-rotate it.
Detail Display
Frequently Asked Questions
The overall height is 44cm, with an exposed diameter of 4.5cm, and it features a 3/4" female inlet size.
The arc can be adjusted from 50° to 360°. Use the plastic head in the angle-adjust hole: rotate clockwise to increase the angle, or anti-clockwise to decrease it. Rotate slowly and check the angle every half turn.
Insert the plastic head into the side lift hole, turn it, and lift the pop-up head. Be sure to lift and release slowly to prevent injury.
Insert the steel head into the nozzle-remove hole and turn anti-clockwise to loosen the screw to remove the nozzle. Place the new nozzle in and turn clockwise to secure. Do not over-rotate to avoid scratching the nozzle.
It offers a choice of 12 nozzles. The range is 1.5~8.0 for the blue nozzle, and 2.0~4.5 for the low angle blue nozzle.
This model comes standard with a 2-year warranty from the date of purchase.
Inquiry Now
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.