Hot Products
China INOVATO HF02-04 Gear Drive Sprinkler - 4 Adjustable Nozzle, Best Suppliers from Factory for Turf & Garden
Dimensions
Overall height: 21cm
Exposed diameter: 4.5cm
Inlet size: 3/4" female
Features
- Models: 10cm
- Arc setting: 60°~360°
- Factory-installed rubber cover
- Through-the-top arc adjustment
- Quick check arc mechanism
- Water lubricated gear-drive
- Nozzle choice: 12
- Nozzle range: 1.5~8.0 blue, 2.0~4.5 low angle blue
- Warranty: 2 years
■ standard/low-angle
Operating Specifications
- Radius: 4.9~14.0m
- Flow: 0.07~3.23m3/hr; 1.2~53.8l/min
- Precipitation rate: 10mm/hr approx
- Trajectory: Standard = 25° Low angle = 13°
- Recommended working pressure: 1.7~4.5bar; 170~450kPa
- Operating working pressure: 1.4~7bar; 140~700kPa
Introduction To End Cap Hole Position
Lift
Use the plastic head to the side lift hole, turn around and lift the pop-up head. Please lift and release slowly. Caution not to hurt yourself.
Nozzle Remove
Use the steel head to the nozzle-remove hole, anti-clockwise to loose the screw and remove the nozzle. Pick a replacement nozzle and clockwise the screw. Please don't over-rotate it. Caution not to scratch the nozzle.
Angle Adjustment
Use the plastic head to the angle-adjust hole, clockwise to magnified the angle, anticlockwise to reduce the angle. Please rotate slowly, check the angle each half circle. Caution not to over-rotate it.
Detail Display
Frequently Asked Questions
What are the physical dimensions of the gear-drive sprinkler?
The sprinkler features an overall height of 21cm, an exposed diameter of 4.5cm, and is equipped with a standard 3/4" female inlet size.
How do I adjust the arc range of this sprinkler?
The arc can be adjusted from 60° to 360° through the top. Insert the plastic head of your tool into the angle-adjust hole and turn clockwise to increase the angle, or counter-clockwise to reduce it. Always rotate slowly and check the angle every half turn.
What is the recommended operating pressure?
The recommended working pressure range is 1.7 to 4.5 bar (170 to 450 kPa). However, the system is designed to operate safely within a pressure range of 1.4 to 7 bar (140 to 700 kPa).
How do I replace or remove the nozzle?
Insert the steel head of your tool into the nozzle-remove hole and turn counter-clockwise to loosen the screw. Once loose, remove the nozzle, insert the replacement, and tighten the screw clockwise. Be careful not to over-rotate or scratch the nozzle.
What are the coverage radius and flow rate specifications?
This sprinkler covers a radius of 4.9 to 14.0 meters. The flow rate ranges from 0.07 to 3.23 m³/hr (equivalent to 1.2 to 53.8 l/min), depending on the nozzle configuration.
Does this gear-drive sprinkler come with a warranty?
Yes, this water-lubricated gear-drive sprinkler is backed by a 2-year warranty.
Inquiry Now
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.