inquiry
Leave Your Message
Industry News

Industry News

News Categories
Featured News
How to Size a Commercial Irrigation Sprinkler System for 50+ Hectares

How to Size a Commercial Irrigation Sprinkler System for 50+ Hectares

2026-05-21
  • Sizing a commercial irrigation system for 50+ hectares starts with determining your peak water demand — calculated as total area × precipitation rate ÷ system efficiency. For a 50-hectare field using gear drive sprinklers at 10 mm/hr with 80% DU, peak demand is approximately 625 m³/hr.
  • Sprinkler spacing should follow the 50–60% diameter rule: place your sprinklers at 50–60% of their published wetted diameter to achieve the overlapping coverage needed for uniformity above 80%.
  • Mainline pipe diameter is the most common sizing mistake — undersized mains cause velocity above 2.0 m/s, leading to pressure loss of 0.5–1.5 bar across the longest lateral, which directly reduces sprinkler performance at the far end.
  • INOVATO’s HF02 series gear drive sprinklers cover 4.9–14.0 m radius with 12 interchangeable nozzles, making them a versatile choice for block layouts, center pivots, and zone-divided large fields.
view detail
Gear Drive Sprinkler vs Impact Sprinkler: Which Saves More Water for Large-Scale Farms?

Gear Drive Sprinkler vs Impact Sprinkler: Which Saves More Water for Large-Scale Farms?

2026-05-21
  • Gear drive sprinklers distribute water 15–20% more uniformly than impact sprinklers across large field areas, directly reducing water waste by up to 25% per irrigation cycle.
  • Impact sprinklers still outperform gear drives in high-sediment water and low-pressure conditions, but at the cost of significantly higher flow rates and uneven coverage at the edges.
  • For farms over 20 hectares, switching from impact to gear drive sprinklers can save approximately 480,000–720,000 liters of water per season (based on 12 irrigation cycles, 100-hectare benchmark), with a payback period of 1.5–2.5 growing seasons through water savings alone.
  • Wholesale pricing for INOVATO gear drive models (HF01/HF02 series) starts at competitive cost per unit — the HF01-04 covers up to 360 m² per sprinkler at 1.7–3.8 bar, making it a strong replacement candidate for legacy impact systems.
view detail
Top 10 Gear Drive Sprinkler Brands for Bulk Purchasing (2025 Guide)

Top 10 Gear Drive Sprinkler Brands for Bulk Purchasing (2025 Guide)

2025-08-26

I always look for trusted names when I buy Gear Drive Sprinkler systems in bulk. My top 10 brands include Rain Bird, Hunter Industries, Toro, K Rain, Orbit, Irritrol, Weathermatic, DripWorks, Victaulic, and ZM.

view detail